AVR330 harman/kardon
MAIN REMOTE CONTROL FUNCTIONS
t Direct Button: Press this button when the tuner28Stereo Mode Select Button:Press this button35Delay/Prev Ch.:Press this button to begin
is in use to start the sequence for direct entry of a sta-to select a stereo listening mode. When the button isthe process for setting the delay times used by the
tionOs frequency. After pressing the button, simplypressed so that DSP SURR OFF appears in theAVR 330 when processing surround sound. After
press the proper Numeric Keys r to select a sta-Lower Display Line?, the AVR will operate in apressing this button, the delay times are entered by
tion. (See page 29 for more information on the tuner.)bypass mode with true, fully analog, two-channelpressing the Set Button p and then using the
left/right stereo mode with no surround processing or?/¤Buttonsnto change the setting.Press the
u Tuning Up/Down: When the tuner is in use, thesebass management, as opposed to other modes whereSet Button p again to complete the process.
buttons will tune up or down through the selected fre-digital processing is used. When the button is pressed(See page 22 for more information.)
quency band. If the Tuner Mode Button s& has
been pressed so that AUTO appears in the on-so that SURROUND OFF appears in the Lower36Speaker Select:Press this button to begin
screen and Lower Display Line?, pressing andDisplay Line?, you may enjoy a two-channel pres-the process of configuring the AVR 330Os bass man-
entation of the sound along with the benefits of bass
holding either of the buttons for three seconds willmanagement. Depending on whether your system isagement system for use with the type of speakers
cause the tuner to seek the next station with acceptableconfigured for 5.1 or 6.1/7.1 channels, the next pressused in your system. Once the button has been
signal strength for quality reception. When MANUALof the button will cause either 5CH STERO or 7pressed, use the ?/¤ Buttons n to select the
appears in the Lower Display Line?, pressing thesechannel you wish to set up. Press the Set Button
buttons will tune stations in single-step increments. (SeeCH STEREO to appear, and the stereo signal willp and then select another channel to configure.
page 29 for more information.)be routed to all five ( or seven) speakers. (See pageWhen all adjustments have been completed, press
27 for more information on stereo playbaqck modes.)
v OSD Button: Press this button to activate thethe Set Button p twice to exit the settings and
29DTSNeo:6 Mode Select:Press this button toreturn to normal operation. (See page 20 for more
On-Screen Display (OSD) system used to set up orselect a DTS Neo:6 mode. These modes take a two-information.)
adjust the AVR 330Os parameters.channel stereo- or matrix surround-encoded source
and create a full five-, six- or seven-channel sound37Multiroom:Press this button to activate the
w Dolby Mode Selector: This button is used tomultiroom system or to begin the process of changing
select from among the available Dolby Surround pro-field. (See page 27 for the available DTS Neo:6the input or volume level for the second zone. (See
cessing modes. Each press of this button will selectoptions.)
one of the Dolby Pro Logic II modes or Dolby 3pages 31 and 33 for more information on the
Stereo. When a Dolby Digital-encoded source is in use,30Macro Buttons:Press these buttons to store orMultiroom system.)
recall a OMacro�, which is a preprogrammed sequence
the Dolby Digital mode may also be selected. (Seeof commands stored in the remote. (See page 35 for38Volume Up/Down:Press these buttons to raise
page 27 for the available Dolby surround modemore information on storing and recalling macros.)or lower the system volume.
options.)
31Disc Skip Button:This button has no direct39TV/Video Selector:This button does not have a
x DTS Digital Mode Selector: When a DTS-function for the AVR 330 but is most often used todirect function on the AVR 330, but when used with a
encoded digital source is selected, each press of thiscompatibly programmed VCR, DVD or satellite receiver
button will scroll through the available DTS modes. Thechange to the next disc in a CD or DVD player whenthat has a OTV/Video� function, pressing this button will
specific choice of modes will vary according to whetherthe remote is programmed for that type of device.switch between the output of the player or receiver
(See page 36 for more information on using the
or not the source material contains DTS-ES 6.1remote with products other than the AVR 330.)and the external video input to that player. Consult the
Discrete encoding. When a DTS source is not in use,ownerOs manual for your specific player or receiver for
this button has no function. (See page 27 for the avail-32Preset Up/Down:When the tuner is in use,the details of how it implements this function.
able DTS Digital options.)press these buttons to scroll through the stations
programmed into the AVR 330Os memory. When 40SPLSelector:This button activates the
y Logic 7 Mode Select Button: Press this buttonAVR 330Os EzSet function to quickly and accurately
to select from among the available Logic 7 surroundsome source devices, such as CD players, VCRs andcalibrate the AVR 330Os output levels. Press and hold
modes. (See page 27 for the available Logic 7cassette decks, are selected using the device Inputthe button for three seconds and then release it. Press
Selectors e, these buttons may function as
options.)Chapter Step or Track Advance.the O5� or O7� Numeric Key r to indicate whether
z Skip Up/Down Buttons: These buttons do notyou are using a 5.1-channel or a 6.1/7.1-channel
33Clear Button:Press this button to clear incorrectspeaker system with the AVR 330. The test tone will
have a direct function with the AVR 330, but whenentries when using the remote to directly enter a radiobegin circulating, and the Program/SPL Indicator
used with a compatibly programmed CD or DVDstationOs frequency.c will change colors. During this sequence, EzSet
changer they will change to the previous disc in the
changer or carousel.34Memory Button:Press this button to enterawill automatically adjust the output levels for all chan-
radio station into the AVR 330Os preset memory. First,nels until they are equal, as shown by the Program/
` Transport Controls: These buttons do not haveSPL Indicator c lighting green for each channel.
any functions for the AVR 330, but they may be tune the desired station, and then press this button.Press this button again when the adjustment is com-
programmed for the forward/reverse play operation Two underline indicators will flash at the right side ofplete to turn off the test tone. (See page 23 for more
the Upper Display Line �, and within five seconds
of a wide variety of CD or DVD players, and audio orpress the Numeric Keys r for the preset numberinformation on EzSet.)
video cassette recorders. (See page 36 for morebetween 01 and 30 that you wish to assign to the416-Channel/8-Channel Direct Input:Press
information.)
station. (See page 29 for more information.)this button to select the device connected to the
8-Channel Direct Inputs j as the audio source.
(See page 25 for more information.)
1212 MAIN REMOTE CONTROL FUNCTIONSMAIN REMOTE CONTROL FUNCTIONS
12 |